High quality DN 20 dual-flow solenoid valve for fuel dispenser

We provide high-quality spare parts for gas station production, and each spare part can only be delivered after our careful inspection. If you have any questions about installation or others, please feel free to consult us!

  • Customized product
  • Free petrol station solution
  • Professional technical support
  • English manual and control circuit diagram
  • Training to install and operate the machine
  • Pre-sale factory inspection

Description

Product Feature:

High flow, low flow

Main Function:

Used for fuel dispenser eliminate the overshoot of refueling, and improve the accuracy of refueling Explosion-proof Standard: GB3836.1-2010 Explosive atmospheres

Part I: Equipment -General requirements & GB3836.2-2010 Explosive atmospheres

Part Ⅱ: Equipment protection by flameproof enclosures”d” Explosion-proof Mark: Exd II BT4Gb

Technical Parameters:

  1. Medium: gasoline, diesel oil. kerosene

  2. Environment Temperature:-35℃~+45℃

  3. Medium Temperature:-35℃~+45℃

  4. Pressure Range:0.035MPa~0.35MPa

  5. Applicable Voltage:220VAC、110VAC、24VDC、12VDC

  6. Voltage Deviation:-10%~+15%

  7. Dielectric Strength:≥20MΩ

  8. Power:2×8.5W(220VAC)、2×7W(110VAC)、2X6W(24VDC)、2X6.5W(12VDC)

  9. Flow:≥40L/min(High Flow):3-5L/min(Low Flow)

Voltage: 220 VAC,110 VAC,24 VDC,12 VDC

ModelSizeInlet connectionOutlet connection
SBD2002DN20hole:2-*9 center distance:70hole:2-*9 center distance:70

The connection method of the dual-flow solenoid valve

  1. Brown-connect the coil of pilot solenoid valve(large flow)

  2. Black-connect common line

  3. Blue-connect the coil of direct action solenoid valve(small flow)

  4. Yellow green-connect earth wire

Install caution

  1. Before normally open the big valve make sure the small valve is connected when you installing the solenoid valve

  2. The power voltage and medium pressure must meet with the label on the solenoid valve, and the medium flow direction need to be the same as arrows on the valve body

  3. It must be a horizontal connection when you installing the solenoid valve on the horizontal pipe

  4. Please make sure there is a filter in the inlet pipe of the solenoid valve and no sand and rust in the pipeline

  5. The free end of the cable must be put into an explosion-proof box or safety equipment when you use and install the explosion-proof solenoid valve

  6. Please make sure there is a dry and ventilated environment for the solenoid valve when you do not use it for the moment, and there is dry wood on the floor

Maintenance

  1. Please make sure power off before maintenance

  2. Only an experienced technician can disassemble the solenoid valve

  3. Please restart the solenoid valve if it can’t work for a long time

  4. Please change the sealing part immediately when it aging, and make sure the sealing part is the original quality

Supply Ability

Supply Ability: 500 Piece/Pieces per month

Packaging & Delivery

Packaging Details: Hard carton or Wooden case

Port Shanghai, Ningbo, any other port is also acceptable

Remark

We provide high-quality spare parts for gas station production, and each spare part can only be delivered after our careful inspection.

If you have any questions about installation or others, please feel free to consult us!

Certification

We have obtained a series of domestic and foreign certificates, and we are confident in our products and services!

Packing & Delivery

Customers don’t need to worry about the container’s floor area ratio.

We can provide you with the free-loading plan for the goods and give you the most economical way of transport!

Normally, we use a carton to wrap the machine and use a sealing tape to secure it.

If the customer has special needs, we can provide the customer with wooden box packaging, the price will be slightly more expensive.